Toyotomi KURO TKN/TKG-671R32

User Manual - Page 13

For KURO TKN/TKG-671R32.

PDF File Manual, 140 pages, Read Online | Download pdf file

KURO TKN/TKG-671R32 photo
Loading ...
Loading ...
Loading ...
GB
13
NOTE:
For preventing cold air, after starting up heating mode, indoor unit will delay 1~5 minutes
to blow air (actual delay time is depending on indoor ambient temperature).
Set temperature range from remote controller: 16°C~30°C (61-86°F); Fan speed: auto, low
speed, low-medium speed, medium speed, medium-high speed, high speed.
3 FAN button
This button is used for setting Fan Speed in the sequence that goes from
AUTO, , , , to , then back to Auto.
NOTE:
Its Low fan speed under Dry mode
X-FAN function: Hold fan speed button for 2s in COOL or DRY mode, the icon “ ” is
displayed and the indoor fan will continue operation for a few minutes in order to dry
the indoor unit even though you have turned off the unit. After energization, X-FAN OFF
is defaulted. X-FAN is not available in AUTO, FAN or HEAT mode.
This function indicates that moisture on evaporator of indoor unit will be blowed after the
unit is stopped to avoid mould.
Having set X-FAN function on: After turning off the unit by pressing ON/OFF button indoor
fan will continue running for a few minutes. at low speed. In this period, hold fan speed
button for 2s to stop indoor fan directly.
Having set X-FAN function off: After turning off the unit by pressing ON/OFF button, the
complete unit will be off directly.
4 TURBO button
Under COOL or HEAT mode, press this button to turn to quick COOL or quick HEAT
mode. “
“ icon is displayed on remote controller. Press this button again to exit
turbo function and “ icon will disappear. If start this function, the unit will run at
super-high fan speed to cool or heat quickly so that the ambient temperature
approaches the preset temperature as soon as possible.
Auto
Low speed
Low Medium speed
Medium speed
Medium - High speed
High speed
INTRODUCTION FOR BUTTONS ON REMOTE CONTROLLER
Loading ...
Loading ...
Loading ...