Loading ...
Loading ...
Loading ...
GB
12
NOTE:
• This is a general use remote controller, it could be used for the air conditioners with mul-
tifunction; For some function, which the model doesn’t have, if press the corresponding
button on the remote controller that the unit will keep the original running status.
• After putting through the power, the air conditioner will give out a sound. Operation indi-
cator “
“ is ON. After that, you can operate the air conditioner by using remote controller.
• Under on status, pressing the button on the remote controller, the signal icon “ “ on
the display of remote controller will blink once and the air conditioner will give out a “de”
sound, which means the signal has been sent to the air conditioner.
1 ON/OFF button
Press this button to turn on the unit. Press this button again to turn off the unit.
2 MODE button
Press this button to select your required operation mode.
AUTO COOL DRY FAN HEAT
• When selecting auto mode, air conditioner will operate automatically according to the sen-
sed temperature. Set temperature can’t be adjusted and will not be displayed as well. Press
“FAN” button can adjust fan speed. Press
/
button can adjust fan blowing angle.
• After selecting cool mode, air conditioner will operate under cool mode. Cool indicator
on indoor unit is ON (This indicator is not available for some models).
Press “ ” or “ ” button to adjust set temperature. Press “FAN” button to adjust fan speed.
Press
/
button to adjust fan blowing angle.
• When selecting dry mode, the air conditioner operates at low speed under dry mode. Dry
indicator on indoor unit is ON (This indicator is not available for some models). Under
dry mode, fan speed can’t be adjusted. Press
/
button to adjust fan blowing angle.
• When selecting fan mode, the air conditioner will only blow fan, no cooling and no
heating. All indicators are OFF, Operation indicator is ON. Press “FAN” button to adjust fan
speed. Press
/
button to adjust fan blowing angle.
• When selecting heating mode, the air conditioner operates under heat mode. Heat indica-
tor
on indoor unit is ON (This indicator is not available for some models). Press “ ” or “
” button to adjust set temperature. Press “FAN” button to adjust fan speed. Press
/
button to adjust fan blowing angle. (Cooling only unit won’t receive heating mode signal.
lf setting heat mode with remote controller, press ON/OFF button can’t start up the unit).
INTRODUCTION FOR BUTTONS ON REMOTE CONTROLLER
Loading ...
Loading ...
Loading ...