Loading ...
Loading ...
Loading ...
Fig. 21
u
Remove the drawer.
u
Slide back at the height you want
Fig. 21 (1)
or
Fig. 21 (2)
.
7.4.2 Repositioning the VarioSafe
You can shift the height of the entire VarioSafe.
Fig. 22
u
Pull forwards.
w
Line up the side runner.
u
Lift or lower to the height you want.
u
Slide to the rear.
7.4.3 Removing the entire VarioSafe
You can remove VarioSafe as a whole unit.
u
Pull forwards.
w
Line up the side runner.
Fig. 23
u
Tip to the side and pull towards you.
7.4.4 Disassembling the VarioSafe
You can take the VarioSafe apart for cleaning.
Fig. 24
u
Disassembling the VarioSafe
7.5 Space for baking tray
There is space for a baking tray
Fig. 1 (8)
above the drawers.
Fig. 25
Ensure that the following conditions are met:
q
Max. baking tray dimensions are adhered to (see 9.1 Tech-
nical specifications) .
q
Baking tray is cooled to room temperature.
q
The lowest door rack is set at least one position higher.
With the door open to 90°:
u
Slide the baking tray onto the lower side runners.
7.6 Drawers
Drawers can be removed for cleaning.
The shelves below can be used for storage until the drawers
are replaced.
The way to remove/insert the drawers varies depending on the
pull-out system. Your appliance can include various pull-out
systems.
Note
The energy consumption increases and the cooling power
goes down if ventilation is not sufficient.
u
Leave the bottom drawer in the appliance!
u
Always leave the fan air vents clear on the back wall!
7.6.1 Removing the drawer
Drawer without a pull-out system
Fig. 26
u
Remove the drawer as shown in the illustration.
Drawer on rails
Fig. 27
u
Remove the drawer as shown in the illustration.
Features
* Depending on model and options 15
Loading ...
Loading ...
Loading ...