Loading ...
Loading ...
Loading ...
OPERATION AND ADJUSTMENT
THE PERFORMANT LUBE TM WALKING BELT
Your treadmill features a walking belt coated with
PERFORMANT LUBE TM, a high-performance lubdcant.
IMPORTANT: Never apply silicone spray or other
substances to the walking belt or the walking plat-
form. They will deteriorate the walking belt and
cause excessive wear.
HOWTO PLUG IN THE POWER CORD
electricshock. This product is equipped with a cord
having an equlpment-grounding conductor and a
grounding plug. Plug the power cord into asurge
protector, and plug the surge protector into an ap-
propriate outlet that Is properly installed and
grounded in accordance with all local codes and
ordinances.
This product is for use on a ilomina1120-volt circuit,
and has a grounding plug that looks like the plug illus-
trated in drawing 1 below. A temporary adapter that
looks like the adapter illustrated in drawing 2 may be
used to connect the surge protector to a 2-pole recep-
tacle as shown in drawing 2 if_apropedy grounded out-
let isnot available.
The temporary adapter should be used only until a
properly grounded outlet (drawing 1) can be installed
by a qualified electrician.
Your treadmill, like any other type of sophisticated
electronic equipment, can be seriously damaged by
sudden voltage changes in your home's power.
Voltage surges, spikes, and noise interference can re-
sult from weather conditions or from other appliances
being turned on or off.
To decrease the pos-
sibility of your tread- 1
mill being damaged,
always use a surge
protector (not In-
cluded) with your
treadmill.
Surge protectors are
sold at most hardware
stores and department
stores. Use only aUL-
listedsurge protector,
rated at 15 amps, with a
14-gauge cord of five
feet or less in length.
This product must be
grounded. If it should
malfunction or break
down, grounding pro-
vides a path of least re-
sistance for electric cur-
rent to reduce the risk of
The green-colored rigid ear, lug, or the like extending
from the adapter must be connected to a permanent
ground such as aproperly grounded outlet box cover.
Whenever the adapter is used it must be held in place
by ametal screw. Some 2-pole receptacle outlet box
covers are not grounded, Contact a qualified elec-
trician to determine If the outlet box cover is
grounded before using an adapter.
jGrounded Outlet Box
Grounding Pin
"_unding Plug
_Grounded Outlet
Treadmill Power Cord--
Gmunding
€_,/Grounded Outlet Box
_.,/_Adapter
_. _ /.,,,:_ /Grounding Pin
(_. , Grounding Plug
Meta Screw
Surge Protector
Loading ...
Loading ...
Loading ...