Loading ...
Loading ...
Loading ...
UV LIGHT BUTTON (For Air Purification)
Pressing this button turns on the “UV” function. The indicator light to the right of the
button will illuminate when turned on. The germicidal UV light improves the air
quality by destroying germs, bacteria, and fungi. To turn of the “UV”, press the
button again.
PLASMA IONISER BUTTON (Ionisation Function)
Pressing this button turns on the “Plasma Ioniser” function. The indicator light to the
right of the button will illuminate to show that it is active. The ioniser can refresh the
air while killing viruses, dust mites, mould, and airborne allergens. To turn off this
function, press the button again.
UP / DOWN BUTTONS
The UP / DOWN buttons allow you to select your desired relative humidity levels in
all modes except SMART mode. The default Relative Humidity is set to 55%. When a
Relative Humidity of 35% is selected, the compressor will not stop until the water
tank is full.
INTELLIGENT DEFROST LIGHT
To prevent ice from building within the unit, the appliance will defrost automatically
if the coil sensor detects that the temperature is too low. The Defrost Indicator light
will illuminate to show that it is active. Once the defrosting process has finished, the
appliance will return to its previous running mode.
TANK FULL LIGHT
The Tank Full indicator light will flash red and the unit will beep if the water tank is
full. Please empty out the water tank to allow the dehumidifier to continue
operation. The light will also illuminate if the tank is incorrectly fitted.
OPERATION LIGHT
The Operation light will illuminate when the compressor inside the unit is running to
extracting moisture from the air. NOTE: The indicator light may not illuminate
immediately when the unit starts as it needs to warm up. The light will turn off once
the desired humidity is reached.
DISPLAY
• When the unit is plugged in, the display will indicate the room humidity level.
• When one of the UP / DOWN buttons are pressed, it will display the humidity
level you desire to set. After a few seconds, it will revert to show the current
humidity level.
• When the Timer Button is pressed, it will indicate in how many hours the timer
function will operate. After a few seconds, it will revert to show the current
humidity level.
CARBON FILTER (FOR AIR PURIFICATION FUNCTION)
Take out the carbon filter from the bag and insert it on the filter. We recommend
cleaning the carbon filter every 2-3 weeks using a vacuum cleaner and changing
them every 3-6 months to keep the room fresh and odour free.
Operating your Appliance
Loading ...
Loading ...
Loading ...