Loading ...
Loading ...
Loading ...
POWER BUTTON
This turns the dehumidifier on and off.
MODE BUTTON
Switch between SMART / HIGH / LOW / and FAN modes.
• SMART Mode: Maintains the room at an ideal domestic environment humidity of
50-55% relative humidity (RH) while saving electricity. The compressor will work
until the desired humidity is reached and then will stop. The unit will operate and
remain in this mode by default when turned on. The desired humidity cannot be
changed in this mode.
• HIGH FAN Mode: This mode ensures the air in the room is processed and RH is
correctly measured with the operating at fan at a higher speed. Adjust your
desired humidity level by using the Up and Down Buttons.
• LOW FAN Mode: This mode ensures the air in the room is processed and RH is
correctly measured with the operating at fan at a lower speed. Adjust your
desired humidity level by using the Up and Down Buttons.
• FAN Mode: This mode only uses the fan – No moisture will be extracted while
this mode is in operation. Filters like the “UV” and “Plasma Ioniser” can be used
in this mode to improve the quality of the air processed and emitted through the
unit.
OSCILLATING BUTTON
Press once to make the louvre swing. Press again to lock the louvres at 45 degrees,
another press will lock them at 90 degrees. The lights will indicate which option is
selected.
TIMER BUTTON
When in standby, press the timer button and the use [UP] and [DOWN] buttons to
adjust the timer (1-24hrs) to select in how many hours you want the unit to start. To
set the timer for when you want the unit stop and turn off, use the [UP] and [DOWN]
buttons while the unit is on.
HUMIDITY INDICATOR LIGHT
The indicator light will turn on automatically when the appliance is turned on.
You can turn off the light by pressing the Humidity Indicator Button.
The colour of the light will change accordingly to the humidity condition:
• Red: High Humidity – RH is over 80%
• Green: Comfortable – RH is between 60-80%
• Orange: Air is dry – RH is under 60%
Operating your Appliance
Close any windows and doors where the unit is running.
Ensure that the water container is positioned correctly.
Loading ...
Loading ...
Loading ...