Loading ...
Loading ...
Loading ...
l,_r-mu.a_.l_lri-
Use to manually adjust the various parameters related to
the sound output.
SET MENU -_ MANUAL SETUP --, SOUND MENU
I>SOUNDMEt,IV
÷ A)TOHE CONTROL
B>SUBWOOFER SET
C>HUTE LEVEL
D>AUDIO DELAY
E>ROOH EQ
F>DD/DTS D_naMic Range
G>TruBass
[_]/[T]:UP/Down
EEHTER]:Enter
• TONE CONTROL (Tone control)
You can adjust the tonal quality of sound beams.
R)TONECONTROL
- +
TREBLE ..... OdB ---IF--
- +
BASS ....... OdB ---IF--
[A]/[_]:UP/Dob_n [_]/[W]:Sel
[ENTER]:Return
TREBLE (Treble)
Use to adjust the high-frequency response.
Choices: -12 dB to +12 dB
Initial setting: 0 dB
BASS (Bass)
Use to adjust the low-frequency response.
Choices: -12 dB to ÷12 dB
Initial setting: 0 dB
• SUBWOOFER SET (Subwoofer settings)
Use to manually adjust the various subwoofer
settings.
BASS OUT (Bass out)
Low-frequency (bass) signals can be directed to the
subwoofer or the front left and right channels. This setting
also determines the routing of LFE (low-frequency effect)
signals found in Dolby Digital or DTS sources.
Choices: SUBWOOFER (Subwoofer), FRONT
• Select SUBWOOFER if you connect a subwoofer. LFE
and low-frequency signals from other channels are
directed to the subwoofer.
• Select FRONT if you do not use a subwoofer. LFE and
low-frequency signals from other channels are directed
to the front left and right channels.
CROSS OVER (Crossover)
When BASS OUT is set to SUBWOOFER, you can use
this feature to select a crossover (cutoff) frequency for all
low-frequency signals. All frequencies below the selected
frequency will be sent to the subwoofer position.
Choices: 80Hz, 100Hz, 120Hz
LFE LEVEL (Low-frequency effect level)
Select to adjust the output level of the LFE (low-frequency
effect) channel according to the capacity of your
subwoofer. The LFE channel carries low-frequency
special effects which are only added to certain scenes.
This setting is effective only when this unit decodes Dolby
Digital or DTS signals.
Choices: -20 to 0 dB
DISTANCE (Distance)
Select to adjust the distance of the subwoofer from the
listening position.
Choices: 0.3 to 15.0 m (1.0 ft to 50.0 ft)
Initial setting: 3.0 m (10.0 ft)
• MUTE LEVEL (Muting level)
Use to adjust how much the mute function reduces the
volume level.
Choices: MUTE, -20 dB
° Select MUTE to completely halt all sound output.
• Select -20 dB to reduce the current volume level by
20 dB.
_.,IM -.
B,:,JE,JuuFERSET
* BRSS OUT ..... FRONT
CROSS OVER,.,IOOHz
LFE LEVEL ...... OdB
DISTRNCE ...... 3.0m
[_]/[T]:UP,"Down [_]/[m]:Sel
[ENTER]:RetuPn
C>MUTELEE
_MUTE -20dB
[_]/[_]:Select
[ENTER]:Return
80 En
Loading ...
Loading ...
Loading ...