Loading ...
Loading ...
Loading ...
32
CONNECTION TO THE GAS SUPPLY
This appliance is suitable for connection with
rigid pipe or exible hose. The isolating manual
shut-off valve connection point must be accessible
when the appliance is installed.
The exible hose assembly must be certied
to AS/NZS 1869 class B or D, be of appropriate
internal diameter for the total gas consumption
(10mm), be kept as short as possible (not exceeding
1200mm), must not be in contact with the oor or
any hot surface or sharp surface. The hose assembly
must not be subject to strain, abrasion, kinking,
deformation or contact with any other appliance.
Where the data plate is obscured by cabinetry
when the cooker is in the installed position,
place the supplied duplicate data plate to
a suitable adjacent surface or within the
instruction manual for future reference.
Gas connection
The gas intake connection of the
appliance has a “male thread.” When
making the connection, take care not to
apply stresses of any kind to the appliance.
Read these points before
connecting to the gas supply:
1. The gas connection point is a 1/2” BSP
external thread located at the rear of of the
appliance (50mm from the edge).
2. Ensure installation allows
withdrawal of the appliance.
3. The appliance regulator provided
must be orientated correctly.
4. The arrow showing the direction
of the ow must be pointed correctly.
5. The regulator has a 1/2”BSP
internal thread at inlet and outlet.
A. Inlet pipe joint
B. Gasket
C. Stable union
Gas leakage and operation of the appliance must be
tested by the installer before leaving. Check burner
ames are blue in colour, stable and completely
ignite at both high and low ame settings with no
appreciable yellow tipping, carbon deposition,
lifting, oating, lighting back or objectionable odour.
Test burners individually and in combination, When
satised with the operation of the cooker, please
instruct the user on the correct method of operation.
INSTALLATION
Loading ...
Loading ...
Loading ...