True Appliances T-72FG-HC~FGD01 Installation manual

Loading ...

TRADITIONAL REACH-INS

TEC_TM_121 | REV. B | EN 07/14/2021 Page 15 of 22

truemfg.com

Maintenance, Care & Cleaning (cont.)

Fig. 8. Carefully slide the condensing unit back into position and replace the bolts.

Fig. 5. Verify all blockages have been removed.

Fig. 6. Remove condenser base bolts.

Fig. 7. Carefully slide the condensing unit out.

Important Warranty Information

THE CLEANING OF THE CONDENSER IS NOT

COVERED BY WARRANTY!

If you have any questions, please contact your local TRUE

Manufacturing Service Department. See the front cover for

locations and contact information.

• Condenser coils accumulate dirt and require cleaning every 30

days or as needed.

• A dirty condenser coil can result in non-warranteed repairs and/

or cabinet failure.

• Proper cleaning involves removing dust from the condenser by

using a soft brush, vacuuming the condenser with a shop vac,

or using CO₂, nitrogen or pressurized air.

• Do not place any filter material in front of the condensing coil.

• On most units, the condenser is accessible by removing the

cabinet's outer grill cover.

• If you cannot remove the dirt adequately, please contact your

licensed refrigeration service provider.

Loading ...

True Appliances T-72FG-HC~FGD01 78.13'' 72 cu. ft. Bottom Mounted 3 Section Glass Door Reach-In Freezer