Loading ...
Loading ...
Loading ...
Starting Distribution
1
Perform the necessary setting for the
decoder and PC application.
For details on the settings, please refer to the
“INSTRUCTIONS” of the respective devices
and applications.
Memo :
0
If there is an NAT router within the
communication path between the camera and
the decoder, port forwarding setup is required.
For details on the settings, please refer to the
“INSTRUCTIONS” of the router in use.
0
The following parameters are required when
connecting to this camera recorder using the
RTSP/RTP.
Port number: 554
Stream ID: stream
0
Use the following to access via URL.
rtsp://<IP address of the camera recorder>:554/
stream
2
With the network connection established,
set [Live Streaming] to “On”.
(A P186 [Preparing Network Connection] )
0
Set [Network] B [Live Streaming] B [Live
Streaming] to “On”.
0
The
network connection mark appears on the
display screen when a network connection is
established.
(A P164 [Network Connection Icon] )
Memo :
0
You can also assign “Live Streaming” to a user
button.
(A P45 [Assignment of Functions to User
Buttons] )
0
You can view the status of distribution on the
LCD monitor.
(A P166 [Live streaming mark] )
Icon Status
.
(Red)
Distribution in progress (good
connection quality)
Blinks when distribution starts or
stops
.
(Red)
Distribution in progress (poor
connection quality)
.
(Yellow)
Waiting for connection (during
RTSP/RTP) or connection failed
0
When the 5 icon is displayed, you can view the
details of the error on the [Streaming] screen of
the status screen.
.
Cause of Error
(A P221 [List of Live Streaming Error Displays] )
Caution :
0
Streaming may be interrupted temporarily 24
hours after the process started.
214
Performing Live Streaming
Connecting to the Network
Loading ...
Loading ...
Loading ...