Loading ...
Loading ...
Loading ...
14
Using The Attachments
Floor Tool (Fig 1): Use the floor tool on hard floor surface when the powerhead is not needed. Can be attached to either the main
extendable wand or the included wand extensions.
Squeegee Floor Tool (Fig 2): Use for cleaning hard floors and for wet pick up. Works great for picking up wet spills or any liquid
To empty the water bowl:
1. Release both latches by pulling the upper part of the latch down and the
lower part up. You can then remove motor unit from the water bowl.
2. Carefully pick up the water bowl by the intake port end, remove it from
the wheel dolly and empty the dirty water into the sink or toilet.
3. If anything is left in the bowl after dumping place the heavier particles
in the bottom of the water bowl in the trashcan (such as wet fuzz)
4. Wash, rinse and dry the water container
5. Store the motor unit apart from the water container until next use so
both can fully dry out.
Care of Hydro Turbine:
Take out the turbine after each use and wash it inside and out with water
and soap, using a stiff bristled toothbrush to scrub the turbine clean. Dry it
and put it back in its place. Tighten the nut by hand until the turbine is
seated and the rim is flush with the rim of the metal casting of the motor.
Do not over tighten, as the Hydro Turbine automatically tightens up on
starting the machine.
WARNING: The Hydro Turbine must always be put back in its place
after cleaning. Do not operate the machine without the Hydro Turbine
installed.
Loading ...
Loading ...
Loading ...