Loading ...
Loading ...
Loading ...
89
Heat point warning mode (
Anti-jamming
or
High Response
) is available for all
detection areas.
4. Set the shield area, and its sensitivity.
Manually configure shield areas to filter fixed false alarm sources, such as the
chimney in residential area, family stove and other areas. In addition, high engine
temperature might also cause false alarm in the areas where vehicles pass, such as
roads, parking lots, gas stations, and these false alarms can also be filtered by
setting shield areas. You can select default mode or compatibility mode for shield
area, and both modes can take effect at the same time.
◇
Click to add shield areas, and you can add 255 areas at most.
◇
Click to delete the shield area.
●
Preset
: Detects heat points on the preset.
1. Select
Preset
in
Heat Mode
.
2. Select the configured preset.
The camera lens rotates to the select preset.
3. Select the
Enable
checkbox.
4. Select the heat point warning mode as needed.
When you select
Anti-jamming
, the Camera detects the suspected heat point
several times. The detection accuracy is higher, but the detection speed is lower.
When you select
High Response
, and the Camera detects heat point quickly, but
the detection accuracy is lower.
Heat point warning mode is available for all detection areas. If you want the PTZ to
detect heat point during the rotation, select
Anti-jamming
.
5. Select a color in , set the area name and sensitivity, and then drag the
mouse on the image.
◇
The higher the sensitivity is, the easier a heat alarm will be triggered.
◇
The whole image is the detection area by default. You can draw multiple
detection areas.
Step 4 Configure arming periods and alarm linkage action. For details, see "5.1.1 Alarm Linkage"
and "5.1.2 Setting Period".
Step 5 Click
Save
.
5.7.7 Configuring Smoke Detection
5.7.7.1 Configuring Rule
After configuring smoke detection rule, when the visible channel detects smoke, an alarm is
triggered, and the system performs linkages such as recording, alarm output, sending email, audio,
alarm light, and snapshot.
Step 1 Select
Setting
>
Smart Thermal
>
Heat
>
Heat
.
Step 2 Select
1
in
Channel
.
Loading ...
Loading ...
Loading ...