Loading ...
Loading ...
Loading ...
66
The locking time is 180 seconds. During the locking period, you can only control the PTZ
manually. Click
Unlock
at the lower-left corner of the
Rule Config
page to manually
unlock the PTZ. Click again after unlocking to re-lock the PTZ.
Figure 5-30 Rule configuration
Step 2 Select the channel.
●
Select
1
in
Channel
to configure the rule for the visible channel.
●
Select
2
in
Channel
to configure the rule for the thermal channel.
Step 3 Select the preset.
The preset with the smart plan enabled is green.
Step 4 Click to add a rule.
Step 5 Double-click the added rule to edit the rule name, and select
tripwire
as the type.
Step 6 Click
Draw Rule
to draw a rule line in the image. Right-click to finish drawing. After
finishing drawing, drag the ends of the line to adjust the detection areas.
●
Tripwire: Draw a detection line.
●
Intrusion: Draw a detection area.
Click
Clear
to delete the drawn rule.
Step 7 (Optional) Select
Max Size
or
Min Size
, click
Draw Target
, and then drag the corners of
the filter box to make the box larger or smaller.
Click
Clear
to delete all drawn detection lines.
Loading ...
Loading ...
Loading ...