Loading ...
Loading ...
Loading ...
131
Parameter Description
Enable ARP/Ping to set
IP address service.
Select the checkbox, get the camera MAC address, and then you can
modify and configure the camera IP address with ARP/ping command.
It is enabled by default. During restarting, you will have no more than
two minutes to configure the camera IP address with a ping packet
which has certain length. The server will be turned off in 2 minutes, or
it will be turned off immediately after IP address configuration. If it is
not enabled, the IP address cannot be configured with ping packet.
A demonstration of configuring IP address with ARP/Ping.
To obtain a free IP address, you need to ensure that the Camera and
your PC are in the same LAN.
Get MAC address from the Camera label.
Open command editor on your PC and enter the following command.
Restart through power or network.
Check your PC command line. If there is information such as "Reply
from 192.168.0.125…", you have done configuration successfully. Turn
it off then.
Enter http://(IP address) in the browser address bar to log in.
Step 3 Click
Save
.
6.2.2 Configuring Port
Configure the port numbers and the maximum number of users (includes web, platform client, and
mobile phone client) that can connect to the device simultaneously.
Step 1 Select
Setting
>
Network
>
Port
.
Loading ...
Loading ...
Loading ...