Loading ...
Loading ...
Loading ...
137
automatically.
Procedure
Step 1 Select
Setting
>
Network
>
UPnP
.
Step 2 Select the
Enable
checkbox.
Step 3 Select the mode, and service name in the port mapping list.
UPnP can be classified as custom mode and default mode.
●
Select
Custom
, click , and then you can change external port as needed.
●
Select
Default
, and then the system finishes mapping with unoccupied port
automatically, and you cannot edit mapping relation.
Figure 6-31 UPnP
Step 4 Click
Save
.
Type "http://external network IP address: external port number" to access Cameras in Intranet
whose ports correspond to your router.
6.2.7 Configuring SNMP
SNMP (Simple Network Management Protocol), which can be used to enable software such as MIB
Builder and MG-SOFT MIB Browser to connect to the Camera and manage and monitor the Camera.
Prerequisites
●
Install SNMP monitoring and managing tools such as MIB Builder and MG-SOFT MIB Browser.
●
You can contact technical support for the MIB file that matches the current version.
Procedure
Step 1 Select
Setting
>
Network
>
SNMP
.
Figure 6-32 SNMP (1)
Loading ...
Loading ...
Loading ...