Loading ...
Loading ...
Loading ...
96
Figure 5-67 Hot trace (Radiometry)
Step 3 Configure the parameters.
Table 5-15 Parameters of hot trace
Parameters Description
Color Mode
Select a color for cold and hot spots.
●
Auto: The hot spot color is red, and the cold spot color is blue by
default.
●
Manual: You can customize the colors for the hot spot and cold
spot.
Alarm Condition
Conditions under which an alarm is triggered.
●
Single
◇
Select the
Hot Spot temperature more than
checkbox and
when the highest temperature is larger than the configured
temperature, an alarm is triggered.
◇
Select the
Cold Spot temperature less than
checkbox and
when the lowest temperature is smaller than the configured
temperature, an alarm is triggered.
◇
If you select both conditions above at one time, an alarm is
triggered once any one condition is satisfied.
●
Combination
●
Only when the highest temperature is larger and the lowest
temperature is smaller than the configured temperature, an
alarm is triggered.
Anti-Dither Only one event is recorded within the time that you have set.
Step 4 Configure arming periods and alarm linkage action. For details, see "5.1.1 Alarm Linkage"
and "5.1.2 Setting Period".
Step 5 Click
Save
.
You can view the effect of hot trace on the
Live
page.
Loading ...
Loading ...
Loading ...