Loading ...
Loading ...
Loading ...
How to Set the Oven for Cleaning
Quick Reminder:
1. Latch the door.
2. Turn the Oven Set knob to CLEAN
If the oven is too hot and you start to set a clean cycle,
you will not be able to slide the latch.
Allow additional time for cooling before you try to set
the cycle.
1. Follow directions to prepare the oven for cleaning
2o Slide the latch handle to the right as far as it wilt go.
Never force the latch
handle. Forcing the handle
will damage the door lock
mechanism.
3_Turn the Oven Set knob It||_
to CLEAN. The CLEAN,
AUTOMATIC OVEN, OVEN ON and COOK TiME
ON/OFF lights will glow.
NOTE; if you turn the Oven Set knob before you slide
the latch, the CLEAN light will flash° Slide the latch to
the righL
Clean cycle time is normally 4 hours and 20 minutes.
On some models you can change the Clean Time to
anywhere between 3 hours and 5 hours and 59 minutes,
depending on how dirty your oven is
You have one minute to change your Clean Time, Use
the HOUR and MIN. pads to change the total Clean Time.
Both the OVEN ON light and the CLEAN light will flash
when the Clean Time is finished..
After using the clean cycle, the door latch and the
Oven Set knob must be returned to their original
positions before you can use the oven°
When the CLEAN light flashes, slide the latch
handle to the left as far as it will go, turn the
Oven Set knob to OFF and open the door..
Never force the latch handle° Wait until the
CLEAN light flashes and the latch slides easily.
Forcing the latch handle may damage the door lock,.
To Stop A Clean Cycle
1. Turn the Oven Set knob to OFE
2. Wait until the oven has cooled below the locking
temperature to unlatch the door You will not be able to
open the door right away unless the oven has cooled
below the locking temperature.
After a Clean Cycle
You may notice some white ash in the oven° Just wipe
it up with a damp cloth after the oven cools.
ff white spots remain, remove them with a soap-filled
steel wool pad Be sure to rinse thoroughly with a vinegar
and water mixture° These deposits are usually a salt
residue that cannot be removed by the clean cycle.
If the oven is not clean after one clean cycle,
repeat the cycle.
NOTE:
oYou cannot set the oven for cooking until the oven is
coot enough for the door to be unlatched.,
=While the oven is self-cleaning, you can press the
CLOCK pad to display the time of day..To return
to the clean count down, press the COOK TIME
ON/OFF pad
(continued next page)
27
Loading ...
Loading ...
Loading ...