Loading ...
Loading ...
Loading ...
Installation Step 9
Electrical Requirements
To reduce the risk of electric shock, your garage
door opener has a grounding type plug with a third
grounding pin. This plug will onlyfit into a grounding
type outlet.
if the plug doesn't fit into the outlet you have,
contact a qualified electrician to install the proper
outlet.
I
To avoid installation difficulties, I
do not run the opener at this time.
I
To prevent electrocution or fire, installation
and wiring must be in compliance with local
electrical and building codes.
Do NOTuse an extension cord, 2-wire adapter,
or change the plug in any way to make it fit
i your outlet.
Right Wrong
If permanent wiring is required by your local code, refer to the following procedure:
To make a permanent connection through the
7/8" diameter hole in the top of the opener
(according to local code):
• Remove the opener cover screws and set the
cover aside.
• Remove the attached 3-prong cord.
• Connect the black (line) wire to the screw on the
brass terminal; the white (neutral) wire to the
screw on the silver terminal; and the ground wire
to the green ground screw. The opener must be
grounded.
• Reinstallthe cover.
I To avoid installation difficulties,do not run the opener at this time.
Ground Tab
Green
Ground_
Screw
Ground
Wire
\
Wh_eWire
Permanent
Wiring
Connections
Black
Wire
Wire
2O
Loading ...
Loading ...
Loading ...