Loading ...
Loading ...
Loading ...
Heatwave® Installation Registration Form
Instructions: This form must be completed and returned for each installation. A copy
should be retained by the homeowner. An installation is defined as each individual space
or room in which Heatwave® is installed such as a bathroom, kitchen, sunroom, etc.
Each Heatwave® shipment includes the following information essential to the proper
installation of the products: Installation/Homeowners Manual, Wiring Diagrams, and
Theoretical Ohm Readings necessary to test the products. If any of this information is
missing from the shipment, please call the dealer or our service department at
1-888-239-1232.
TO ENSURE WARRANTY PROTECTION FOR THE INSTALLATION(S), THE HOMEOWNER OR INSTALLER MUST
COMPLETE ALL THE INFORMATION BELOW FOR EACH INSTALLATION AND RETURN THIS FORM TO HEATIZON
SYSTEMS AT THE ADDRESS LISTED BELOW WITHIN 10 DAYS OF THE COMPLETED INSTALLATION.
I. Installer Information:
Installer’s Name: _________________________________________________________ Installation Date: ___-___-___
Business Address ______________________________________________________________________________________
Phone Number: _____-_____-______ Email Address: _____________________________________________________
Name of Company (from which Heatwave® was purchased) _________________________________________
II. Owner Information:
Owner’s Name: ________________________________________________________________________________________
Home Address: ________________________________________________________________________________________
Phone Number: _____-_____-______ Email Address: _____________________________________________________
Name of Space and Location in Structure where installed: ____________________________________________
III. Products Used in Installation:
(List Each Heatwave® Mat or Cable on a Separate Line)
(Note: “Hot” or “Neutral” in this table indicates the white conductors in the Cold Lead)
Confirmation: The above information was measured and recorded correctly as indicated on the measuring
instrument, and the enclosed drawing shows the final layout of the products and the electrical connections.
Installer’s Signature: ________________________________________________________________________________________________________
Mat or
Cable
Number
Model # Total Watts Volts
R E S I S T A N C E I N O H M S
Received
After Mat is customized/cut
(Optional test—Mats only)
After Mat/Cable is attached
to subfloor/underlayment
After Mat/Cable is embedded
in thinset or mortar
After flooring has been In-
stalled on top of Mat/Cable
Hot
to
Hot/
Neutral
Hot
to
Hot/
Neutral
Hot
to
Ground
Neutral
to
Ground
Hot
to
Hot/
Neutral
Hot
to
Ground
Neutral
to
Ground
Hot
to
Hot/
Neutral
Hot
to
Ground
Neutral
to
Ground
Hot
to
Hot/
Neutral
Hot
to
Ground
Neutral
to
Ground
SAMPLE 1x 50 750 120 19.2 19.2 Open Open 19.2 Open Open 19.2 Open Open 19.2 Open Open
#1
#2
#3
#4
#5
#6
From Heatizon Systems
4137 South 500 West
Murray, Utah 84123
888-239-1232 | heatizon.com
Loading ...