Loading ...
Loading ...
Loading ...
07
7-109
Information
• When ‘Highway Driving Assist’ is
deselected, the setting for ‘Highway
Lane Change Assist’ cannot be
changed.
• If there is a problem with the functions,
the settings cannot be changed. Have
the vehicle inspected by an authorized
retailer of Genesis Branded products.
• If the engine is restarted, the functions
will maintain the last setting.
ORG3SP072343NORG3SP072343N
Warning Volume
With the Engine Start/Stop button in the
ON position, select ‘Driver Assistance →
Warning Volume’ from the Settings menu
to change the Warning Volume to ‘High’,
‘Medium’, ‘Low’ or ‘Off’ for Highway
Driving Assist system.
If ‘Driving Safety Priority’ is selected, the
vehicle lowers all other audio volumes
when the warning sounds for safe
driving.
However, even if ‘Off’ is selected, the
Hands-off Warning Volume will not turn
off but the volume will sound as ‘Low’.
If you change the Warning Volume,
the Warning Volume of other Driver
Assistance systems may change.
Operation
Basic function
Display and control
You can see the status of the Highway
Driving Assist operation in the Driving
Assist view on the cluster. Refer to “View
Modes” section in chapter 4.
Highway Driving Assist will be displayed
as below depending on the status of the
function.
Operating stateOperating state Standby stateStandby state
ORG3SP072057NORG3SP072057N ORG3SP071282NORG3SP071282N
• When operating
(1) Highway Driving Assist indicator,
whether there is a vehicle ahead
and the selected distance level
à Highway Driving Assist indicator
- Green : Operating state
- Grey : Standby state
- White blink: Accelerator
depressed state
(2) Set speed
(3) Lane Following Assist indicator
(4) Whether there is a vehicle ahead
and the selected headway
(5) Whether the lane is detected or
not
to “Smart Cruise Control (SCC)” and
“Lane Following Assist (LFA)” sections
Loading ...
Loading ...
Loading ...