Loading ...
Loading ...
Loading ...
Driver Assistance System
7-84
Overtaking Acceleration Assist
Overtaking Acceleration Assist will
operate when the left turn signal
indicator is turned on while Smart Cruise
Control is operating, and the following
conditions are satisfied:
• Your vehicle speed is above 40 mph
(60 km/h)
• The hazard warning flasher is off
• A vehicle is detected in front of your
vehicle
• Deceleration is not needed to
maintain distance with the vehicle in
front
• When the left turn signal indicator
•
Acceleration Assist will operate when
using the function in countries with
check the road conditions at all
Display and control
Basic function
You can see the status of the Smart
Cruise Control operation in the Driving
Assist view on the cluster. Refer to “View
Modes” section in chapter 4.
Smart Cruise Control will be displayed
as below depending on the status of the
function.
OperatingOperating Temporarily canceledTemporarily canceled
ORG3071279NORG3071279N ORG3SP072040NORG3SP072040N
• When operating
(1) Whether there is a vehicle ahead
and the selected distance level are
displayed
(2) Set speed is displayed
(3) Whether there is a vehicle ahead
and the target vehicle distance are
displayed
• When temporarily canceled
(1) indicator is displayed
(2) The previous set speed is shaded
Loading ...
Loading ...
Loading ...