Loading ...
Loading ...
Loading ...
12 13
EN EN
Note:
· Make sure that the robot is fully charged before using it. Do not manually move
the robot when it is cleaning.
· If the battery gets low while cleaning, the robot will return to the base and resume
cleaning after charging its battery. The "Resume Cleaning" function must be enabled
on the app in advance.
Cleaning Mode
After the robot is turned on, it cleans each room by cleaning along the
edges and walls rst and then cleaning in an S-shaped pattern. The robot
automatically returns to the base to charge its battery after cleaning.
How to Use
Sweeping Function
Note: Do not attach the mop pads while using the sweeping function.
Method 1: Press the button on the base sand the robot will start
sweeping.
Method 2: Press the button on the robot and the robot will start sweeping.
MAX
To the MAX Line
Mopping Function
1. Attach the mop pads
2. Take out the fresh tank, ll it with clean water, and then place the fresh
tank into the base.
Note:
· Do not ll with hot water, otherwise the fresh tank may be deformed.
· Use only Dreame-branded detergents to help prevent malfunction.
Note: Do not use the mopping function on the carpet.
6. Clean the mop pads
How to Use
Note:
· If the robot is not on the base, please put it back before starting it.
· The robot will clean the mop pads before it starts cleaning. Please wait patiently
until the mop pads are cleaned.
· Do not manually move the base, fresh tank, waste tank, or washboard while mopping.
Note:
· To engage mop cleaning at any time, press and hold the button on the base for 3 seconds.
· While cleaning the mop pads, if the water in the fresh tank is insucient or the
waste tank is full, the robot will send a voice prompt, or the app will send a notication.
· After the robot nishes mopping, promptly clean the waste tank to prevent mold
or odor. Changing the mop pads every 1 to 3 months is recommended.
After the robot completes cleaning and returns to charge, the base will start
cleaning and drying the mop pads.
3. Place the robot onto the base5. Return to self-clean
While mopping, the robot will return to the base to have the mop pads
cleaned according to cleaning conditions set in the app. The robot will
resume cleaning after the mop pads are cleaned.
Press the button. The robot will start from the base and mop the house based
on the optimal cleaning plan arranged in the map.
4. Start mopping
Loading ...
Loading ...
Loading ...