Loading ...
Loading ...
Loading ...
u
Activate the HydroBreeze.
w
The air moisture in the Safe increases.
If there is too much moisture in the compartment:
u
Choose the setting “low air moisture”.
-or-
u
Remove any excess moisture with a cloth.
Note
You can apply the “low air moisture” setting to the Fruit &
Vegetable-Safe and the Meat & Dairy-Safe.
u
Set the “low air moisture” option.
7.10 HydroBreeze
HydroBreeze emits a mist over the refrigerated goods to
provide moisture every time the door is opened.
The HydroBreeze and its water tank are located in the
adjustable bottle shelf.
Ensure that the following conditions are met:
-
The water tank is clean (see 8.4.3 Clean the compo‐
nents) .
-
The water tank is properly engaged.
-
Moisture is set to “high moisture” (see 7.9 Adjusting the
moisture levels) .
-
HydroBreeze is on (see HydroBreeze) .
7.10.1 Fill the water tank
WARNING
Unclean water!
Contaminants.
u
Only fill with drinking water.
u
The HydroBreeze is off: empty water tank.
u
The HydroBreeze is no longer in use: empty water tank.
NOTICE
Sugar-content liquids!
Damage to HydroBreeze.
u
Only fill with drinking water.
Note
Only use filtered, decarbonised water for the best quality
drinking water and to make the HydroBreeze, work
smoothly.
This water quality can be achieved using a table water filter
of the kind available in trade retail outlets.
u
Only ever fill the water tank with filtered, decarbonised
drinking water.
The water tank is built into the adjustable bottle shelf
(see 1.2 Overview of the appliance and equipment) .
Fig. 48
u
Press on the back-left corner of the front glass plate.
w
The glass panel folds up at the front.
u
Lift the glass panel and fold towards the rear until it
clicks into place Fig. 48 (1).
w
Glass panel stands upright.
u
Slide the slider Fig. 48 (2) to the left.
w
The water tank jumps out of its recess.
u
Remove the water tank Fig. 48 (3).
u
Cleaning the water tank (see 8.4.3 Clean the compo‐
nents) .
Square opening:
u
Fill with drinking water up to the marker.
u
Insert the water tank into the recess, bottom first.
u
Slowly lower the front part and push the tank in.
w
The water tank is clicked into place.
7.10.2 Dismantling the water tank
You can take the water tank apart for cleaning.
Fig. 49
u
Dismantling the water tank.
7.11 Accessories
7.11.1 Butter dish
Opening/closing the butter dish
Fig. 50
Dismantling the butter dish
You can take the butter dish apart for cleaning.
Features
* Depending on model and options 19
Loading ...
Loading ...
Loading ...