Loading ...
Loading ...
Loading ...
Fig. 41
u
Slide rails in.
u
Place drawer on rails.
u
Slide in drawer to the back.
w
Drawer latches in audibly at the back.
Partial pull-out fridge compartment*
Removing drawer
Fig. 42
u
Pull out drawer half-way. Fig. 42 (1)
u
Lift the drawer from the bottom. Fig. 42 (2)
u
Lift and hold the drawer and at the same time pull it
forwards.
u
Insert left rail. Fig. 42 (3)
u
Insert right rail. Fig. 42 (4)
u
Remove drawer to the front. Fig. 42 (5)
Fig. 43
If the rails are not yet fully inserted after removing the
drawer:
u
Push rails in completely.
Inserting drawer
Fig. 44
u
Slide rails in.
u
Place drawer on rails.
u
Slide in drawer to the back.
7.8 Fruit & Vegetable safe cover
You can remove the compartment cover for cleaning.
7.8.1 Removing the compartment cover
Ensure that the following conditions are met:
q
Bottle shelf is removed (see 7.6 Adjustable bottle shelf) .
Fig. 45
When the drawers are removed:
u
Pull the lid up at the front to the opening in the retaining
parts Fig. 45 (1).
u
Lift from the back and pull it up and out Fig. 45 (2).
7.8.2 Inserting the compartment cover
Fig. 46
If the text THIS SIDE UP points upwards:
u
Insert the lip of the cover over the opening of the rear
bracket Fig. 46 (1) and click into place Fig. 46 (2).
u
Position the cover where you want it (see 7.9 Adjusting
the moisture levels) .
7.9 Adjusting the moisture levels
You can adjust the moisture in the drawer yourself by
adjusting the compartment cover.
The compartment lid is attached to the drawer and can be
hidden by a shelf or additional drawers.
Fig. 47
Low air humidity
u
Open the drawer.
u
Slide the compartment cover forwards.
w
With the drawer closed: Gap between the cover and the
compartment.
u
Switch off HydroBreeze.
w
The air moisture in the Safe decreases.
High air moisture
u
Open the drawer.
u
Slide the cover back.
w
With the drawer closed: The cover seals the compart‐
ment.
Features
18 * Depending on model and options
Loading ...
Loading ...
Loading ...