Loading ...
Loading ...
Loading ...
With the door open to 90°:
u
Slide the baking tray onto the lower side runners.
-or-
If baking tray is uneven:
u
Use the supplied support rails.
Fig. 36
u
Snap support rails into the lowest runners.
With the door open to 90°:
u
Slide the baking tray in on the support rails.
7.6 Adjustable bottle shelf
7.6.1 Using the bottle shelf
In the bottom of the fridge section you can either use the
variable bottle shelf or the glass panel.
Fig. 37
u
Remove the glass panel and store in a safe place.
u
Lay bottles with their base towards the rear wall.
Note
If the bottles are protruding over the front of the bottle
shelf:
u
Move the lower door rack up a place.
7.6.2 Removing the bottle shelf
You can remove the bottle shelf for cleaning.
u
Remove the glass panel above the bottle shelf.
Fig. 38
u
Lift the bottle shelf at the front and pull out.
Note
Liebherr recommends the following:
Do not place any goods on the drawer cover below.
7.6.3 Inserting the bottle shelf
Fig. 39
u
Slide in the bottle shelf until it engages and push down.
w
The lugs at the back of the bottle shelf are connected
automatically.
w
LED comes on.
7.7 Drawers
You can remove the drawers for cleaning.
You can remove the drawers to use VarioSpace.
The way to remove/insert the drawers varies depending
on the pull-out system. Your appliance can contain various
pull-out systems.
Note
The energy consumption increases and the cooling power
goes down if ventilation is not sufficient.
u
Always leave the fan air vents clear on the back wall!
7.7.1 Drawer on telescopic rails
The drawer runs on extendible rails (telescopic rails). There
are fully extendible telescopic rails and telescopic rails with
partial pull-out. Drawers which are fully extendible can be
pulled out fully from the appliance. Drawers with partial
pull-out cannot be removed fully from the appliance. The
system in your appliance depends on the type of appliance.
Fully extendible*
If you have fully extendible rails, there is a clamp located at
the back on the left and right of the rail.
Removing drawer
Fig. 40
u
Pull out drawer as far as it will go.
u
Lift left clamp and simultaneously pull drawer forwards
on the left. Fig. 40 (1)
u
Lift right clamp and simultaneously pull drawer forwards
on the right. Fig. 40 (2)
u
Remove drawer to the front. Fig. 40 (3)
u
Slide rails in.
Inserting drawer
Features
* Depending on model and options 17
Loading ...
Loading ...
Loading ...