Loading ...
Loading ...
Loading ...
82
Figure 4-72 Serial port settings
Table 4-30 Description of serial port settings parameters
Parameter Description
IP Address
Enter the corresponding device address, it is
1
by default.
Make sure that the address is the same as the device address; otherwise you
cannot control the device.
Baud Rate Configure device baud rate, it is
9600
by default.
Data Bit
It is
8
by default.
Stop Bit
It is
1
by default.
Parity It is none by default.
Step 3 Click
Apply
.
4.8.4 Manager
4.8.4.1 Requirements
To make sure the system runs normally, maintain it as the following requirements:
●
Check surveillance images regularly.
●
Clear regularly user and user group information that are not frequently used.
●
Change the password every three months. For details, see "4.8.2 Account".
●
View system logs and analyze them, and process the abnormity in time.
●
Back up the system configuration regularly.
●
Restart the device and delete the old files regularly.
●
Upgrade firmware in time.
4.8.4.2 Maintenance
You can restart the system manually, and set the time of auto reboot and auto deleting old files. This
function is disabled by default.
Step 1 Select >
System
>
Manager
>
Maintenance
.
Step 2 Configure auto maintain parameters.
●
Restart system:
Loading ...
Loading ...
Loading ...