Loading ...
Loading ...
Loading ...
126
●
Color Code: Enable this function, and a color code is displayed on the right side of surveillance
images to show change of color between minimum temperature and maximum temperature.
Procedure
Step 1 Select
Temperature Measurement
>
Global Configuration
.
Step 2 Set the parameters.
Figure 9-4 Global configuration
Table 9-3 Global configuration
Parameter Description
Temperature Enable the temperature measurement function.
Temperature Unit Includes °C and °F
。
Relative Humidity
Relative humidity of environment, and it ranges from 0 RH–
100 % RH.
Atmosphere Temperature
Temperature of the environment, and it ranges from–50 °C to
327.7 °C.
Target Radiation Coefficient
Set radiation coefficient of targets that are shot by this
Camera. Ranges from 0.5–1
Target Distance
Distance from the Camera to targets that are shot, and it
ranges from 0 m–10000 m.
Target Reflection Temperature
Temperature of targets that are shot by this Camera. Ranges
from–50 °C to 327.7 °C.
Isotherm
After enabling this function, make sure that make sure that
floor temperature≤ median temperature≤ ceiling
temperature≤ saturation temperature.
Min Temperature
●
When gain mode is under low-temperature mode, value
ranges from–40 °C to 150 °C.
●
When gain mode is under high-temperature mode, value
ranges from–40 °C to 600 °C.
Loading ...
Loading ...
Loading ...