Loading ...
Loading ...
Loading ...
33
Classification Parameter Description
FFC Period
You can configure this parameter only when
FFC Mode
is set to be
Auto
.
Adjust time gap of correcting the shutter automatically.
Do FFC
Click
Do FFC
to trigger the shutter correcting for this
time.
Step 6 Click
Apply
.
4.3.2 Correcting Defective Pixels
When there are a few defective pixels to be corrected, you can correct then manually.
Step 1 Select >
Camera
>
Image
>
Defective Pixel Correction
.
Step 2 Click to enable the function.
Step 3 Select the calibration mode. Generally, you can select
Picture
, and for the image with
defective pixels that appears occasionally, select
Video
.
Step 4 Click on the right side of the image.
Step 5 Click a defective pixel in the image, and is displayed near the defective pixel.
Step 6 Roll the mouse wheel to zoom in the image.
Step 7 Click the defective pixel again, and overlaps the defective pixel.
Step 8 Click
Calibration Confirmed
.
Step 9 Click
Setting
.
Step 10 Click
Save
.
To correct multiple defective pixels at the same time, calibrate one defective pixel, repeat
Step1–Step8, and then do Step9–Step10.
4.3.3 Configuring Encode
4.3.3.1 Configuring Encode Parameter
Configure video stream parameters, such as compression, resolution, frame rate, bit rate type, bit
rate, I frame interval, SVC, and watermark.
Step 1 Select >
Camera
>
Encode
>
Encode
.
Step 2 Select the channel.
●
Select
1
in
Channel
to set the parameters of visible channel.
●
Select
2
in
Channel
to set the parameters of thermal channel.
Step 3 Configure encode parameters.
Loading ...
Loading ...
Loading ...