Loading ...
Loading ...
Loading ...
13
Figure 3-6 Change IP address
Step 5 Configure IP address.
●
DHCP mode: When there is a DHCP server in the network, set the
Mode
as
DHCP
and
the Camera obtains IP addresses from the DHCP server automatically.
●
Manual mode: Set
Mode
as
Static
and enter
Starting IP
,
Subnet Mask
and
Gateway
.
Then, IP addresses of Cameras are incrementally modified from the start IP address.
If you select the
Same IP
checkbox, the IP address of the devices will be set to the same
one.
Step 6 Click
OK
.
3.3 Logging in to Web Page
After you have changed the IP addresses, you can log in to the web page of the Camera through a
browser to operate, configure and maintain.
Background Information
To log in to the Camera in a smooth way, you need to make sure that the PC connected to the
Camera satisfies the following requirements.
Procedure
Step 1 Open Chrome browser, enter the IP address of the camera (192.168.1.108 by default) in the
address bar and press the Enter key.
Loading ...
Loading ...
Loading ...