Loading ...
Loading ...
Loading ...
Entering the day of the week:
1. Press Setup.
2. Select Clock.
3. Select Day.
4. Select Back or Fwd to scroll through the days.
5. Select Set.
6. To exit the Setup mode, press Setup or Back.
Canceming the clock/day of week dispmay:
1. Press Setup.
2. Press Clock.
3. Press the Down arrow to scroll to the next screen.
4. Select Disable.
5. Select Off to turn the clock display off, or select On to turn
the clock display on.
6. Select Set.
7. Select Off to turn the day display off, or select On to turn
the day display on.
8. Select Set.
9. To exit the Setup mode, press Setup or Back.
To set the clock for a 12 or 24 hour format:
The clock can be set to display time in either a 12 hour or 24
hour format.
1. Press the Setup pad.
2. Setect Clock.
3. Use the down arrow to scroll to the next screen.
4. Select 12/24 Hr.
5. Select 12 Hr or 24 Hr
6. Select Set.
7. Press Setup or Back to exit Setup mode.
Setting the Timers (Timer 1 or Timer 2):
1. PressTimer 1 or Timer 2.
2. Select one of the displayed times using the Quickset pads
or the Options Knob.
Note: Each press of the displayed time choices adds
additional time. For example, pressing "10 rain" three times
provides 30 minutes on the timer (0:30}.
3. After three seconds, the timer will start counting down.
Changing the amount of time entered once the
Timer starts:
1. Press the Timer 1 or Timer 2 pad ONCE.
5
2. Select one of the displayed times using the
Quickset pads until the desired time is entered.
3. After three seconds, the timer will start counting down the
new time.
Canceling the Timer:
1. Press the Timer 1 or Timer 2 pad TWICE. OR
2. Press the Timer 1 or Timer 2 pad ONCE and select Cancel
on the Quickset pads.
Changing the Timer format:
The Timers can be set to display hours and minutes (HR/MIN}
or minutes and seconds (MIN/SEC}.
1. Press the Setup pad.
2. Select the Down arrow and scroll until you see Timer
Format.
3. Select Timer Format.
4. Select HR/MIN or MIN/SEC.
5. Select Set.
Changing the Timer beeps:
The signal beeps for Timer 1 and Timer 2 can be changed.
The options available are two beeps every' thirty seconds, two
beeps every' sixty seconds or 1 beep only. The defauk setting
is 2 beeps every' 30 seconds.
1. Press the Setup pad.
2. Select the down arrow to scroll down until
Tones is displayed.
3. Select Tones.
4. Select Timers.
5. Select the desired timer beep format. (2-30 sec.
2-60 sec. or 1 Beep}
6. Select Set.
Locking the Control and Oven
Door
The oven control and oven door can be locked to prevent
accidental programming. If an oven function is currently
being used, the control and door cannot be locked.
To lock the control and door:
Press the Back and Setup pads at the same time, holding for
three seconds or until "Locked" appears in the display.
To unlock the control and door:
Press the Back and Setup pads at the same time, holding for
three seconds. The Time of Day will appear in the display
when the controls are unlocked.
Loading ...
Loading ...
Loading ...