Loading ...
Loading ...
Loading ...
![](https://files.manualsfile.com/33024768-rh-wq-36/bgb.png)
11
INSTALLATION
not blocked by the ceiling.
• Insert the screws into the holes and fasten them
so that the mounting plate is securely mounted
to the ceiling.
• Remove the cover of the electrical box.
• Pull the house wiring through the 6-3/4" hole in
the ceiling and into the electrical box. Secure
the house wiring cables to the mounting plate /
electrical box with appropriate connectors.
• Install the inner duct cover and outer duct cover
to the mounting frame.
• Install the top exhaust to the range hood.
Connect the top exhaust to a 6" round duct and
seal the connection.
• Lead the other end of the duct through the
mounting frame and the hole in the ceiling.
• Install the range hood to the bottom of the
mounting frame.
CAUTION
Make sure the range hood is securely mounted
before releasing.
• Connect the free end of the duct to the roof / wall
cap.
Electrical Connection
• This range hood comes with a power cord with
a 3-prong plug. Connect the power cord to a
designated grounded standard 110V outlet.
WARNING
Electrical Shock Hazard
Disconnect power before servicing
• In case of a direct connection to the house wiring
ispreferred,dothefollowing:
• Disconnect the power.
• Cut o the plug from the power cord.
• Connect the wires from the power cord to the wires from
the house wiring using UL listed wire connectors.
• Store the excess wires in the wiring box.
• Reconnect the power.
Installing the Bae Filters
• Peelotheprotectivecoverfromthebaelters
if there's any.
• Alignthebaelterswiththerangehoodand
install them from left to right.
Completing the Installation
Turn blower ON in the control panel. Check all lights
and fan operations.
Loading ...
Loading ...
Loading ...