Awoco RH-WQ-36 User Manual

Loading ...

INSTALLATION

INSTALLATION INSTRUCTIONS

CAUTION!

Wear gloves to protect against sharp edges.

IMPORTANT!

PLEASE FOLLOW THESE INSTRUCTIONS

TO TEST THE RANGE HOOD BEFORE

INSTALLATION FOR ANY DEFECTS OR

SHIPPING DAMAGE:

• Remove the range hood and accessories from

the package carefully.

• Place the Hood Unit and the Blower Unit on a

atstablesurface,removetheba󰀪elterand

check for any dent or damage on the range hood

body.

• Remove the loosen parts if there's any.

• Plug the range hood into a 120V AC power

source.TouchtheSpeedSelection(-)or(+)

button to turn it on.

• Check each speed variation and pay attention

to the noise level to make sure there isn't any

unusual noise besides it coming from the wind

blowing. Press the Light Button to check the

lights.

• Verifyallfunctions,asinstructedinPage12,are

operational.

• Refer to Range Hood Troubleshooting in Page

14 for general issues and solutions.

• Thewhiteproctivelmontheba󰀪eltermust

be removed before using the range hood.

• If the range hood you receive is damaged or

defective,pleasecontactthesellerimmediately.

Do not try to install and use the damaged or

defective unit.

IMPORTANT!

TOAVOIDDAMAGETOTHERANGEHOOD,DO

NOT LET DEBRIS ENTER THE VENT OPENING.

CAUTION!

IFMOVINGTHECOOKINGRANGEIS

NECESSARYTOINSTALLTHERANGEHOOD:

• For electric ranges, unplug the power rst before moving it.

• For gas ranges, shut o the gas valve before moving it.

Observe and prepare the location

• Determine the location for the range hood. Refer

to instructions in Page 7 for clearance guidiance.

• Determine which venting method to use: roof or

wall.

• Purchaseanyneccessaryaccessories,suchas

duct,elbow,reducer,damper,ducttape,screws

etc.,fromthehardwarestore.

• Useastubndertolocateandmarkthestuds

inside the wall.

• Beforebeginningtheinstallation,makesure

there is proper clearance within the ceiling or

wall for the exhaust vent.

Installing the Range Hood

Note

• The ceiling must be able to hold at least 265 lbs

of weight.

• The ceiling must be at least 1-1/4" thick if the

range hood's top mounting plate is to be installed

directly to the ceiling.

• It is recommended to build a stud frame above

the ceiling and install the range hood to the

studs for a more secure installation.

The following steps requires 2 or more people:

• Determind the location and height to mount the

range hood. The range hood should be aligned

with the stove.

• Mark the perimeter of the top of the duct cover

on the ceiling.

• Drillahole,whichis6-3/4"indiameter,inthe

center of the perimeter in the ceiling for the 6"

duct access.

• Align the mounting plate with the perimeter

and drill 12 holes in the ceiling. Make sure the

electrical box opening on the mounting plate is

Loading ...

Awoco RH-WQ-36 Island Mount 43”H Stainless Steel Range Hood 4 Speeds, 6” Round Top Vent 900CFM 4 LED Lights & Remote Control 36” Island Mount

User Manual - Page 10