Loading ...
Loading ...
Loading ...
83
5. CLI Commands
show sensor
Use the show sensor command to display the settings for a specific or all sensors.
Syntax
show sensor [<sensor-name>]
• sensor-name – Displays details for the specified sensor.
Examples
The following command displays the settings for all sensors associated with device “PDU123”:
console> device (PDU123)> show sensor
NAME ACIVE TYPE MANUFACTURER MODEL SERIAL #
----------- ----- ----------- ------------- ------- ---------------
TopCombo yes EnviroSense TRIPP LITE E2MTDO 2631AV0AC88A3000010
Temp 1 yes EnviroSense TRIPP LITE E2MTHDI 2631AV0AC886D000014
DigitalOut yes EnviroSense TRIPP LITE E2MTDO 2631AV0AC88A3000019
device: sensor: asset-tag
asset-tag
Use the asset-tag command to optionally enter an asset identifier for the sensor. Use the no form of this command to clear
the entry.
Syntax
asset-tag <tag>
no asset-tag
• tag – Specifies an identity for the sensor. If spaces are required, bookend the name in quotation marks (“).
Example
The following command assigns “ZQ32B” as the asset tag for sensor “E2MT1” connected to device “PDU-Rack1”:
console> device (PDU-Rack1)> sensor (E2MTD1)> asset-tag ZQ32B
Update complete
show asset-tag
Use the show asset-tag command to display the identifier entered for the device.
Syntax
show asset-tag
Examples
The following command displays the asset tag for sensor “E2MT1” connected to device “PDU-Rack1”:
console> device (PDU-Rack1)> sensor (E2MTD1)> show asset-tag
ZQ32B
Loading ...
Loading ...
Loading ...