Loading ...
Loading ...
Loading ...
112
5. CLI Commands
show http
Use the show http command to display the current settings for the HTTP service.
Syntax
show http [status | port | redirect]
Examples
The following command displays all HTTP service information:
console> show http
HTTP Status : enabled
HTTP Port : 8077
HTTP Redirect : disabled
https
https enable
Use the https enable command to enable the HTTPS service. Use the no form of this command to disable the HTTPS service.
Note that changes to network parameters must be applied using the apply network command for the changes to take effect.
The HTTPS service is enabled by default.
Syntax
https enable
no https enable
Examples
The following command disables the HTTPS service:
console> no https enable
Update complete
NOTE: Use the “apply network” command to complete the change. This may cause a system
reboot.
https port
Use the https port command to set the port number to use for the HTTPS service. The default port number for the HTTPS
service is 4040.
Syntax
https port <port-number>
• port-number – Specifies the port to use for the HTTPS service (Range: 1-65535).
Examples
The following command changes the port to use for the HTTPS service to 4033:
console> https port 4033
Update complete
NOTE: Use the “apply network” command to complete the change. This may cause a system
reboot.
Loading ...
Loading ...
Loading ...