Loading ...
Loading ...
Loading ...
57
5. CLI Commands
device: details
details
Use the details command to display a comprehensive list of the device’s metrics.
Syntax
show details [<device-name>]
• device-name – Specifies the device for which detailed metrics are to be displayed. This option is not required if no other
devices are connected.
Example
The following command displays detailed metrics for device “PDU-Rack1”:
console> device (PDU-Rack1)> show details
NAME TYPE VALUE
---------------------- ------- -------
Input Voltage (V) Input 120.9
..Recorded High/Low
....Minimum (V) 118.5
...Maximum (V) 121.6
Nominal Input Voltage (V) Input 120
High Critical 138
High Warning 132
Low Critical 102
Low Warning 108
device: energy
energy saving setting
Use the energy saving setting command to set the output load percentage trigger for automatic shutdown.
Syntax
energy saving setting <integer-value>
• integer-value - Sets the output load percentage that will trigger an automatic shutdown.
Example
The following command sets the energy saving setting at 15% for device “UPS123”:
console> device (UPS123)> energy saving setting 15
Update complete
Loading ...
Loading ...
Loading ...