Loading ...
Loading ...
Loading ...
20
Recoil tension will decrease over time as the Bungee Shock Cord stretches. To
increase recoil tension, simply push the Inner Clip out of the Bungee Hook End
Frame from behind, pull the required amount of bungee through the Inner Clip and
replace the Inner Clip into the Bungee Hook End Frame as shown below.
Inner Clip
Bungee Hook End Frame
Rower Handle
Belt/Bungee Pulley
3.Wind the Rower Belt onto the Belt/
Bungee Pulley until the Rower Handle
is as it’s furthest forward position.
4.Rethread the Bungee Shock Cord (on
opposite side of the Idle Wheel) back
through the Bungee Pulleys and tie off
at the Attachment Point.
Bungee Shock Cord
Bungee Pulley
Hint: Before reattaching the Inner
Clip/Bungee Hook End Frame, tie a slip
knot under slight tension at the lower
bungee pulley. This will keep the bungee
under tension while reassembling the
Bungee Hook End Frame.
Loading ...
Loading ...
Loading ...