Loading ...
Loading ...
Loading ...
10
Completing The Rower Assembly
Pull Bungee Cord and hook Bungee end
onto the Bungee Hook Mount as shown.
Tighten
frame bolts
securely
once rower
is standing.
Once the Bungee cord is attached to the Rear
Brace, tighten the bolts holding the Footboard, the
Mainframe to Side Rail Bolts as they are easier to
access from the vertical position.
Lower the Rower back to the Horizontal position
and test for proper bungee recoil.
Check Seat Rollers/Runners for dirt or debris be-
fore sitting on the rower seat. Small objects cap-
tured between the seat rollers and runners can
damage the wheels or running surface. Check
runners for debris prior to each use and clean
regularly.
Note: The Rower frame bolts require periodic
checking for tightness. Do this at the end of the
first month of use and again after every 12
months
Choose a suitable location when standing the
Rower for storage.
The Rower frame can be polished with any high
grade furniture polish to further highlight the rich
luster of the wood finish.
Install supplied 2x AA Duracell battery and check
computer function. Details regarding can be
found in the Computer section of this manual.
Choose a flat, level surface on which to use your
Rower, to avoid rocking and potential premature
wear.
Loading ...
Loading ...
Loading ...