OWON SDS7072E 70MHz 2Ch Digital Oscilloscope

Manual - Page 79

For SDS7072E.

PDF File Manual, 106 pages, Read Online | Download pdf file

SDS7072E photo
Loading ...
Loading ...
Loading ...
5.Advanced User Guidebook
74
Carry out the following operation steps for the time cursor measurement of the channel
CH1:
1. Press Cursor and recall the Cursor Measure menu.
2. Press the H2 button and choose CH1 for Source.
3. Press the H1 button, the Type menu will display at the right of the screen. Press
the F3 button to select Time for Type, with two purple dotted lines displayed
along the vertical direction of the screen, which indicating Cursor 1 and Cursor 2.
4. According to the measured waveform, adjust the positions of Cursor1 and
Cursor2 by turning the VERTICAL POSITION knob of CH1 and CH2. The
cursor increment window at the left bottom of the waveform shows absolute
difference, frequency and the present time of the two cursors.
Figure 5-73 Waveform of Cursor Measurement
The Cursor Measurement for FFT mode:
Press the Cursor button to display the cursor measurement function menu (CURS MEAS)
in the screen, which includes Vamp Measurement and Freq Measurement at the mode of
FFT, shown as Figure 5-74.
Loading ...
Loading ...
Loading ...