Loading ...
Loading ...
Loading ...
20
4 Built-in battery
Parent topic: Printer Parts Locations
Battery Charging
You can charge the built-in battery by connecting the power cord and AC adapter, and plugging the
product into an electrical outlet. Or, you can connect the product to your computer (or other USB power
source) using the USB cable.
Battery status is indicated on the LCD screen.
Note the following:
• The battery is not a user-replaceable part.
• Even when the product is not in use, the battery runs down. Make sure you turn off the product when
you are not using it and charge the battery on a regular basis.
• The battery runs down faster in low temperature environments.
• The battery may be hot right after it is charged or used; this is normal.
• Charge the battery within a range of 50 to 95 °F (10 to 35 °C). The battery may not charge fully or may
deteriorate if the environment is too hot or cold.
• It takes about 2.5 hours to fully charge the battery.
• You do not need to use the battery completely before charging it.
• If the battery runs out quickly even after it is fully charged, it may be at the end of its service life.
Contact Epson to replace the battery.
• If you do not use the printer for a long time, charge the battery on a regular basis to avoid letting it run
out. If the printer does not turn on, charge the battery for more than thirty minutes, and then turn the
printer on again.
• The battery charging light is orange during charging and turns off when the battery is fully
charged. The light flashes if the environment is too cold or too hot to charge the battery.
Charging the Built-in Battery Using the AC Adapter
Charging the Built-in Battery Using the USB Cable
Parent topic: Product Basics
Charging the Built-in Battery Using the AC Adapter
You can charge the built-in battery using the AC adapter.
Loading ...
Loading ...
Loading ...