Loading ...
Loading ...
Loading ...
193
• Make sure to remove the yellow tape from the cartridge before installing it; otherwise, print quality may
decline or you may not be able to print. Do not remove or tear the label on the cartridge; this can cause
leakage.
• Insert the ink cartridge in the correct direction; otherwise you may damage the product.
• The included initial cartridges are designed for reliable printer setup and cannot be used as
replacement cartridges or resold. After setup, the remaining ink is available for printing.
• Do not touch the green IC chip on the side of the cartridge. This may prevent normal operation.
• Do not shake, squeeze, or drop cartridges after opening their packages and do not tear the cartridge
labels; this can cause them to leak.
• Do not replace ink cartridges with the power off and do not move the print head by hand; otherwise,
you may damage the printer.
• Do not turn off the printer during ink charging. If the ink charging is incomplete, you may not be able to
print.
• If you remove an ink cartridge for later use, recap the ink cartridge using the cap that came with it to
prevent the ink from drying out and to protect the surrounding area from getting smeared by ink.
• Use an ink cartridge before the date printed on its package.
• Do not dismantle an ink cartridge. This could damage the print head.
• Do not disassemble the ink cartridges or maintenance box; you may get ink in your eyes or on your
skin.
• Store ink cartridges in a cool, dark place. Keep ink cartridges out of direct sunlight, and do not store in
high or freezing temperatures.
• After bringing an ink cartridge inside from a cold storage site, allow it to warm up at room temperature
for at least three hours before using it.
• Store ink cartridges with their labels facing up. Do not store cartridges upside down.
Parent topic: Important Safety Instructions
LCD Screen Safety Instructions
• Use only a dry, soft cloth to clean the LCD screen. Do not use liquid or chemical cleansers.
• If the LCD screen is damaged, contact Epson. If the liquid crystal solution gets on your hands, wash
them thoroughly with soap and water. If the liquid crystal solution gets into your eyes, flush them
immediately with water. If discomfort or vision problems remain after a thorough flushing, see a doctor
immediately.
• Do not press too hard on the LCD screen or subject it to heavy impacts.
Loading ...
Loading ...
Loading ...