Loading ...
Loading ...
Loading ...
f. The “Puffing” key
As you press the “Puffing” key, the puffing indicating lamp will be on, which means that the
puffing function is enabled. At the time if you start the cleaning function, the puffing pump output
will always switch on. If the automatic function is enabled, the puffing pump will switch on for 1
minute and then close. And if there is the knockout action, after the knockout is finished the
puffing pump will switch on after 8 seconds dealy, and close after working 1 minute. As you press
the “Puffing” key again, the puffing function will be closed.
g. Level indicating lamp for the cylinders
When there are materials in the material cylinder, the level indicating lamp for the cylinder will be
continuously on. When the the cylinder is short of materials, the correcopnding level indicating
lamp will flash and the buzzer tweets at the same time. After the material is fed, the above
phenomena can be relieved.
h. Output cups
Zero cleaning of output cups
As you press the “Stop” key and hold it for 5s, you enter the menu of inputing zero cleaning
password (The initial zero cleaning password is 8888,). At the time as you press the Plus key, you
can move the password, and as you press the Minus key, you can change the password value. After
the password is correctively input, as you press the “Stop” key again, the zero cleaning of output
cups is made and exits.
Revision of the zero cleaning password
Press the “Time” key and hold it for 5s. Then you enter the menu of inputting the password. Input
the initial zero cleaning password, and at the time as you press the Plus key, you can move the
password and as you press the Minus key, you can change the password value. After you finish
revising the password, as you press the “Time” key again, the zero cleaning password is saved and
exits.
i. Hardness setting
Common operation panel
As you press the “Hardness+” or “Hardness-” key and hold it for 2s, the hardness setting LED
flashes. At the time you can adjust the hardness of the ice cream. The bigger the number is, the
harder of the ice cream, and vice versus. After the setting is finished, the hardness value can be
automatically saved in 5s.
Operation panel of jams
i) As you hold on pressing the “Hardness setting” key for 2s, the hardness setting LED flashes. At
the time you can adjust the hardness of the ice cream. The cycle time can be set as 4.0-7.0. The
bigger the number is, the harder of the ice cream, and vice virsus. After the setting is finished, the
hardness value can be automatically saved in 5s.
ii) As you hold on pressing the “Jams delay” key for 2s, the jams delay LED flashes. At the time
as you press the “Jams delay” key, you can change the value. The cycle time can be set as 0.0-0.9.
The bigger the number is, the more amout of the jams when the ice cream tapers, and vice virsus
(Generally it is suggested that the value to be set at 0.3.). After the setting is finished, it will be
automatically saved in 5s.
j. The “Jams” key
When the machine is at the cleaning sate, as you press the “Jams” key, the Jams indicating lamp
will be on and the jams pump begins to work at the same time. When you press the “Jams” key
again, the jams indicating lamp will be off and the jams pump stops work.
（7）
Loading ...
Loading ...
Loading ...