Loading ...
Loading ...
Loading ...
2) Operation panel of jams
a. The “Atuo” key
As you press the “Auto” key, the buzzer will twitter a short sound and the Atuo indicating lamp be
on at the same time. The machine enters the automatic working state, and the stirring motor begins
to run. The actual measured hardness shows the present current value of the stirring motor. After
10 seconds, the compressor, draught fan and solenoid valve begins to work and the machine enters
the full automatic mode. When the actual measured hardness reaches the set hardness, the machine
will automatically stop and enter the auto standby mode. When the stopping time reaches the set
time, the machine begins to work again and repeats the same cycle. If you want to stop the
machine, just press the “Stop” key.
b. The “Clean” key
As you press the “Clean” key, the buzzer will twitter a short sound and the cleaning indicating
lamp be on at the same time. The machine enters the cleaning state, and the stirring motor begins
to run. The actual measured hardness shows the present current value of the stirring motor. When
you press the “Stop” key, the machine will stop its operation and enter the standby state.
c. The “Time” key
The restart time can be set by pressing the “Time” key. As you press it every time, the time will
increase 1 minute. The larger the value is, the longer time of the restart time. The cycle is 3-9
minutes. After the setting is finished, the time will be automatically saved after 5 seconds.
d. The “Stop” key
Whether the machine is at the cleaning state or automatic working state, as long as you press the
“Stop” key, the machine will stop its operation and return to the standby state.
e. The “Pre-cooling” key
As you press the “Pre-cooling” key, the pre-cooling indicating lamp will be on, which means the
pre-cooling function is enabled. When the temperature of the feed trough is above 15℃, the
pre-cooling system begins to work; when the temperature of the trough is less than 8℃, the
pre-cooling system will close. And you can see the actual measured temperature is displayed here.
(6)
Loading ...
Loading ...
Loading ...