Loading ...
Loading ...
Loading ...
15
Maintenance
Battery Replacement
BATTERY REPLACEMENT
1. Open the DS200 Multimeter per directions above.
2. Remove old batteries.
3. Observe the battery polarity indication on the circuit board. Insert 2 new AA 1.5V batteries as shown on the circuit board.
4. If you have inserted the batteries with the correct polarity, the Innova Multimeter’s LED will blink slowly several times before
turning o. If the light does not blink, check the battery polarity.
5. Close the Innova Multimeter per directions above.
CLEANING
Gently wipe the assembled meter with a damp cloth.
Do NOT touch or apply cleaning agents to the circuit board.
Do NOT use any solvents or other cleaning agents while cleaning your Innova Multimeter. The outer housing is a polycarbonate based
material, and may be damaged by incompatible cleaners.
DS200_Technical_Manual_bleed_.indd 15 7/25/2022 4:08:57 PM
Loading ...
Loading ...
Loading ...