Loading ...
Loading ...
Loading ...
14
Maintenance
Closing your Innova Multimeter
CLOSING YOUR INNOVA MULTIMETER
WARNING: Risk of electrical shock. Do not operate the meter while partially disassembled.
1. Place the PCB in the bottom enclosure half. Use the “J” shaped n for alignment with the corresponding cut-out in the PCB.
2. Close the two halves together.
3. Replace both screws. Tighten rmly.
DS200_Technical_Manual_bleed_.indd 14 7/25/2022 4:08:57 PM
Loading ...
Loading ...
Loading ...