Ancona AN-22118SS 2-piece Kitchen Appliance Package with 36" 6-burner Gas Cooktop with 1200CFM Undercabinet Range Hood

User Manual - Page 14

For AN-22118SS. Also, The document are for others Ancona models: AN-2160, AN-2161, AN-2162, AN-2230SS, AN-2236SS, AN-2248SS, AN-2230WHT, AN-2236WHT, AN-2248WHT, AN-2230SSBK, AN-2236SSBK, AN-2248SSBK

PDF File Manual, 55 pages, Read Online | Download pdf file

AN-22118SS photo
Loading ...
Loading ...
Loading ...
— 14 —
Operation
Increase
Speed
Decrease
Speed
Timer
Lamp Power
NOTE: When the hood has been initially connected to the
Power or after a Power Failure, all indicators turn ON for 1
second then OFF, the hood is in Standby condition.
Once the hood is connected with electricity, if wires for the control
are not well connected or control board has poor connection or
malfunction,buzzerwillemitSix Beeps. You must then disconnect
the hood from the Power, x the problem and reconnect the hood.
Lamps
(with 3 luminance setting + auto mode)
u
Press once:
Lamps turn ON with High luminance.
Indicator is OFF, indicator is ON.
v
Press second time:
Lamps turn ON with Low luminance.
Indicator is OFF, indicator is ON.
w
Press third time:
Lamps turn ON with Night-Light luminance.
Indicator is OFF, indicator is ON.
x
Press fourth time:
You will hear a “Long audible beep”,
Lamps will work in Auto Night-Light mode.
Indicator is ON, indicator is ON.
y
Press fth time:
You will hear a "Short audible beep",
Auto Night-Light mode is disabled.
Lamps are OFF. Indicator is OFF.
Cycle is: “High luminance - Low luminance - Night-Light
luminance - Auto Night Light - lamps OFF - High luminance …”
NOTE: When light sensor detects the room is dark, lamps
will turn on to Night-Light luminance. When light sensor
detects the room is less dark, Night-Light will turn OFF
automatically. And cycle repeats again and again.
Power
u
Press once:
Fan starts to work at 1st-speed.
Indicators are ON.
v
Press second time:
Fan will turn OFF, hood is in Standby condition.
All indicators are OFF.
Fan
(with 5 speed setting)
u
Press or once:
Fan starts to work at 1st-speed (minimum speed).
Digit “1” shows on screen.
Indicators are ON.
v
Press second / third / fourth time:
Fan will work at 2nd / 3rd / 4th-speed subsequently.
Digit “2 / 3 / 4” shows on screen.
Indicators are ON.
w
Press fifth time:
Fan will work at 5th-speed (maximum speed).
Digit “5” shows on screen.
Indicators are ON.
x
Press once:
Fan will work at 4th-speed.
Digit “4” shows on screen.
Indicators are ON.
y
Press second / third / fourth time:
Fan will work at 3rd / 2nd / 1st-speed subsequently.
Digit “3 / 2 / 1” shows on screen.
Indicators are ON.
U
Press fifth time:
Fan will turn OFF. Indicators are OFF.
Indicator is OFF (if lamps are OFF).
Timer
You can only activate the TIMER function when Fan is
working. TIMER will not function with only Lamps ON.
TIMER is xed for 3 minutes delay OFF.
u
Press once when Fan is working at any speed:
Fan will work continuously for 3 minutes, then Fan will
shut OFF automatically.
v
Press again before the end of 3 minutes, and
TIMER will be deactivated.
w
After activating the TIMER, if you change the FAN
speed, TIMER will be deactivated instantly.
IMPORTANT: When Lamps and/or Fan are working …
Pressing once will turn them OFF instantly!
Loading ...
Loading ...
Loading ...