Ancona AN-22118SS User Manual

Loading ...

— 11 —

Installation

STEP 6

Preparations

NOTE: To avoid damage to your hood, prevent debris from entering the vent opening.

•Determine and mark the centre line on the ceiling or wall where the range hood will be installed.

•Make sure there is proper clearance within the ceiling or wall for exhaust vent.

•Duetotheweightandsizeofthisunit,pleasemakesurethatthesupportsystemorframeworkbeingusedisstableand

secure in the ceiling or wall.

•Put a thick, protective covering over countertop, cooktop or range to protect from damage or dirt.

•Removeanyhazardousobjectsaroundtheareawheninstalling.

CAUTION

If moving the cooking range is necessary to install the hood, turn OFF the power on an electric range at the main

electrical box. SHUT OFF THE GAS BEFORE MOVING A GAS RANGE.

STEP 7

Top Venting Using Round Damper Flap

•Fixthedamperflapsontopoftherangehood(seefigure1).

•Attach 8 in. (20.3 cm) ducting transition (optional).

STEP 8A

Installing the Hood: Attaching the Unit to the Wall

•After determining the installation height, drill four Ø 8 mm holes on the wall according to the distance from the center

hole on the back of the hood, according to the mounting position dimensions.

•The following drawings show the mounting dimensions of the 30 in. (76 cm) width and the 36 in. (90.5 cm) width.

Figure 1

Figure 2-1

27.9 in. (70.8 cm) 33.4 in. (84.8 cm)

0.5 in.

(1.4 cm)

3.5 in.

(9 cm)

3.5 in.

(9 cm)

0.5 in.

(1.4 cm)

Figure 2-2

Loading ...

Ancona AN-22118SS 2-piece Kitchen Appliance Package with 36" 6-burner Gas Cooktop with 1200CFM Undercabinet Range Hood