Loading ...
Loading ...
Loading ...
2.3 Parts List
QtyPart Description
1
1 User’s Manual
1
2 Cigarette lighter adapter
1
3 Battery hookup clips
1
4 Probe tip
1
5 Extension cable(20ft.)
1
6 Rugged blow molded case
1
7 Power assist cable
2.4 General Description
The tool is the best electrical tester for reducing diagnostic time in all 6 to 30-volt
vehicle electrical systems. After a simple hook-up of the tool to the vehicle's battery,
you can:
◆ Determine at a glance if a circuit is positive, negative, or open without having to
reconnect clips from one battery pole to another.
◆ Test for continuity with its built-in auxiliary ground lead.
◆ By depressing the power switch, conduct a positive or negative battery current to
the probe tip for testing the function of an electrical component without the use of
jumper wires.
◆ Test for poor ground contacts instantly without performing voltage drop tests. The
tool is also short circuit protected; its internal circuit breaker will trip if it becomes
overloaded.
◆ Follow and locate short circuits without wasting fuses. The tool's long cable allows
you to test along the entire length of the vehicle without constantly searching for
suitable vehicle grounds
2.5 Power
The tool is powered via the vehicle battery. Connect the RED battery clamp to the
POSITIVE terminal of the vehicle's battery, and the BLACK clamp to the NEGATIVE
terminal. When the tool is first connected to a battery (power source), it will sound a
beep and the Head Lights will be on to illuminate the test area of the probe tip.
2.6 Quick Self-Test
Before you test a circuit or component, be sure your tool is in good order by doing a
quick self-test.
With the tool connected, perform a quick self-test. The power switch is a momentary
rocker switch located on the tool's body. Flanking the switch are positive and
negative
Loading ...
Loading ...
Loading ...