Loading ...
Loading ...
2.2 Tool Description
2. Using the Test Tool
2.1 Specifications
To prevent personal injury or damage to vehicles and/or the test Tool,read this
instruction manual first and observe the following safety precautions whenever
working on a vehicle:
◆ Always perform automotive testing in a safe environment.
◆ Wear eye protection that meets ANSI standards.
◆ Keep clothing, hair, hands, tools, test equipment, etc away from all moving or hot
enging parts.
◆ Operate the vehicle in a well ventilated work Area: Exhaust gas are poisonous.
◆ Put blocks in front of the drive wheels and never leave the vehicle unattended
while running tests.
Use ectreme caution when working around the ignition coil, distributor cap, ignition
wires and spark plugs. These component create Hazardous voltage when engine
is running.
◆ Put the transmission in PARK (for automatic transmission) or NEUTRAL (for
manual transmission) and make sure the parking brake is engaged.
◆ Keep a fire extinguisher suitable for gasoling/chemical/electrical fires nearby.
◆ Don’t connect or disconnect any test equipment while the ignition is on or the
enging is running.
◆ Keep the tool dry, clean, free from oil/water or grease. Use a mild detergent on
a clean cloth to clean the outside of the test tool, when necessary.
◆ When the power switch in the tool is depressed, battery current/voltage is
conducted directly to the tip which may cause sparks when contactiong ground or
certain circuits.Therefore the tool should NOT be used around flammables such as
gasoline or its vapors. The spark of an energized tool could ignite these vapors. Use
the same caution as you would when using an arc welder.
Display TFT color display (168× 128 dpi)
Operating Temperature 0 to 60°C (32 to 140°F)
Storage Temperature -40 to 70°C (-40 to 185°F)
External Power 12.0 or 24.0 V power provided via vehicle battery
Dimensions (L × W × H) 178 × 47 × 28mm (7 × 1.85 ×0.09 in)
Net Weight 0.1Kg (0.22LB)
Loading ...
Loading ...
Loading ...