Loading ...
Loading ...
Loading ...
4 Operation
▸ Confirm the selection with «OK».
– The ready to start screen with reduced setting options appears in the display.
▸ If required, touch and set the options (see page 23).
▸ Press «Start» to start the subsequent step.
Cancelling operation
To cancel operation, the following options are available:
▪ Select the function button to access the start screen (see page 18).
▪ Press and hold the function button to switch the appliance off (see page 33).
After 3 minutes without interaction.
– The display goes dark and the appliance switches off automatically (see page
33).
4.25 Switching the appliance off
▸ Press and hold the function button.
– Any running application is ended; if turned on, the timer will remain active.
– If turned on, the display lock is deactivated.
– For applications with steam, the steam is eliminated.
– The display goes dark.
– The appliance is in EcoStandby.
Display after switching off
Depending on the application and settings, the following is shown in the darkened dis-
play.
– The residual heat and the temperature if it is above 80°C.
– The food probe temperature if the food probe is still plugged in.
– «Do not remove the water tank» after all applications with steam, as long as the wa-
ter system has not been emptied.
4.26 Emptying the water tank
Risk of scalding!
The water in the tank may be hot. If the following appears in the display: «Do not
remove the water tank», the temperature of the residual water is too high and can-
not be pumped back yet. Do not remove the water tank!
For safety reasons, the residual water is only pumped off when it reaches below a
certain temperature.
After switching off the appliance
– the residual water in the boiler is pumped back into the water tank.
– in the display appears: «The water is being pumped off».
Once the water has been pumped off,
▸ Touch the «Open water compartment flap» function button.
– The flap of the water tank compartment opens.
▸ Remove, empty and dry the water tank.
▸ Slot the water tank back into position in the water tank compartment.
▸ Close the water compartment flap manually.
Any application can be started again.
33
Loading ...
Loading ...
Loading ...