Loading ...
Loading ...
Loading ...
For cement or concrete construction, you
will need a 1/4" x lib " lag bolt and a 1/2" O.D.
sleeve anchor, which are not provided. Drill
the recommended size hole for the hardware.
Install the sleeve anchor into the drilled hole
and then install the lag bolt through the device.
The bolts must be properly tightened as
recommended for the hardware.
Wallboard Back of
range
Anti-Tip
device
Wood screw
Wa,£te .
5. Slide the range against the wall, and check
for proper installation by grasping the front
edge of the cooktop andcarefully attempting to
tilt the range forward.
COHVERTIHGTO LP GAS
(or converting back to natural gas from LP)
This range leaves the factory set for use with
natural gas. If you want to convert to LP gas, the
conversion must be performed by a qualified LP
gas installer.
The conversion instructions and LP orifices
can be found attached to the range next to the
pressure regulator.
Keep these instructions and the orifices in case
you want to convert back to natural gas.
WHEH ALLHOOKUPSARE COMPLETED:
MAKE SUREALLCOHTROLSARE LEFTIH
THE OFFPOSITIOH.
MAKE SURETHE FLOWOF COMBUSTIOH
AHD VEHTILATIOHAIR TO THE RAHGEIS
UHOBSTRUCTED.
41
Loading ...
Loading ...
Loading ...